P100 Filter |
|
High performance particle filter type P100 |
|
|
|
The model 510 P100 filter is tested and approved by NIOSH for use against fumes, dusts and mists having a time-weighted average less than 0.05 milligram per cubic meter, radon daughters attached to these dusts, fumes and mists, radionuclide and asbestos-containing dusts and mists. |
|
Molded polyethylene. No metal parts. |
|
approximately 1.5 oz (42 g) |
|
Largest diameter: approx. 4.2" (107 mm)
Thickness: approx. 1.2" (31 mm) |
|
Particle filter contains about 160 sq inches (1,096 sq cm) non-woven hydrophobic fiberglass paper |
|
Tested by NIOSH with a DOP aerosol:
Flow rate 32 l/min: average leakage <0.001%
Flow rate 85 l/min: maximum leakage 0.003%
Filter is 100% tested at the manufacturing facility |
|
At 85 l/min: 145 Pa (max allowed is 300 Pa)
After being loaded with silica dust: 168 Pa (max allowed is 500 Pa) |
|
Pre-filter: |
Pre-filter 221 and pre-filter holder 5153 should always be fitted
NB: The pre-filter is not a protective element |
|
Storage: |
Store at room temperature in clean, dry place
The date of manufacture is printed on the label (Month/Year) |
