| TIDALWAVE 600™ A unique lightweight 6" (152 mm) large diameter hose capable of significant water flow at higher pressures. TIDALWAVE 600™ is a 100% polyester double jacket, 300 PSIG (2100 kPa) service test pressure rated attack, and supply hose. Lined with TPU elastomer for flexibility, light weight and compactness, TIDALWAVE 600™ occupies less space than conventional rubber covered LDH, and has a higher service pressure rating as well. This hose meets or exceeds NFPA standards for attack, realy, and supply hose. The ENCAP™ treated outer jacket improves durability, reduces water absorption up to 40%, enhances chemical resistance, and adds color options. When ordering coupled TIDALWAVE 600™ hose assemblies requiring a 300 PSIG (2100 kPa) annual service test pressure, specify either threaded couplings or Kochek Storz Couplings.
Length: Up to 100' (30,5 m).
Option: Colors available: clear (white), green, red, orange, blue, purple, tan and yellow.
|
 |
 | | | | TIDALWAVE 600™ specifications
 | The hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets. | |
| There shall also be a minimum of 14.0 filler yarns per inch in the inner jacket and 12.5 filler yarns per inch in the outer jacket. | |
| The thickness of the lining shall be 0.020" (508 µm) minimum and it shall be constructed of extruded T.P.U. elastomer. | |
| The outside jacket shall be treated with ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket. | |
| The hose service temperature range shall be -60°F to 150°F (-51°C to 66°C). | |
| FM abrasion test of 50,000 cycles minimum and Taber abrasion test of 10,000 cycles minimum. | |
| At 600 PSIG (4200 kPa), its elongation shall not exceed 12% of the initial hose length, it shall not warp more than 12 inches (31 cm) and should not rise from the test table. | |
| The hose shall not twist more than 1½" turn per 100 ft (30,5 m) while at 600 PSIG (4200 kPa). | |
| Minimum service test pressure of 300 PSIG (2100 kPa). | |
| Minimum proof test pressure of 600 PSIG (4200 kPa). | |
| Minimum straight burst test pressure of 900 PSIG (6300 kPa). | |
| The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa). | |
| Meets or exceeds NFPA 1961 specifications. |
|
|
