| SUPPLYLINE™ The large diameter hose (LDH) fire departments wish they always had. SUPPLYLINE™ is a 100% polyester, double jacket, TPU elastomer lined hose with a service test pressure rating of 300 PSIG (2100 kPa). Compared to traditional rubber LDH; SUPPLYLINE™ is lighter in weight, more compact, flexible to -60F (-51C), more abrasion and puncture resistant, approved for potable water, and can be loaded without hanging to dry. SUPPLYLINE™ is also used as a Soft Suction hose in shorter lengths. The ENCAP™ treated outer jacket improves durability, reduces water absorption up to 40%, enhances chemical resistance, and adds color options. When ordering coupled SUPPLYINE™ hose assemblies requiring a 300 PSIG (2100 kPa) annual service test pressure, specify either threaded couplings or Kochek Storz Couplings.
Length: Up to 100' (30,5 m).
Option: Colors available: clear (white), green, red, orange, blue, purple, tan and yellow.
|
 |
 | | | SUPPLYLINE™ specifications
 | The hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets. | |
| For the 4" (102 mm) hose, there also be a minimum of 13.0 filler yarns per inch in the inner jacket and 10.5 filler yarns per inch in the outer jacket. For the 5" (127 mm) hose, there shall be a minimum of 14.0 filler yarns per inch in the inner jacket and 10.0 filler yarns per inch in the outer jacket. | |
| The thickness of the lining shall be 0.020" (508 µm) minimum and it shall be constructed of extruded T.P.U. elastomer. | |
| The outside jacket shall be treated with ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket. | |
| The hose service temperature range shall be -60°F to 150°F (-51°C to 66°C). | |
| FM abrasion test of 50,000 cycles minimum and Taber abrasion test of 15,000 cycles minimum. | |
| At 600 PSIG (4200 kPa), its elongation shall not exceed 10% of the initial hose length, it shall not warp more than 12 inches (31 cm) and should not rise from the test table. | |
| The hose shall not twist more than 1½ turns per 100 ft (30,5 m) while at 600 PSIG (4200 kPa). | |
| Minimum service test pressure of 300 PSIG (2100 kPa). | |
| Minimum proof test pressure of 600 PSIG (4200 kPa). | |
| Minimum straight burst test pressure of 900 PSIG (6300 kPa). | |
| The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa). | |
| Meets or exceeds UL-19 and NFPA 1961 specifications. | |
| Upon ordering LOCKING Storz couplings separately for SUPPLYLINE™, please specify that these couplings are for NIEDNER SUPPLYLINE™ hose. |
| Physical properties | 4"
(102 mm) | 5040 | 4 3/8"
(111,1 mm) | 34 lbs
(15.4 kg) | 18"
(46 cm) | 300 PSIG
(2100 kPa) | 5"
(127 mm) | 5050 | 5 3/8"
(136.5 mm) | 42 lbs
(19 kg) | 18.5"
(47 cm) | 300 PSIG
(2100 kPa) |
| | |
|
|
