The most popular forestry hose in North America, HOTLINE®, is a single jacket 100% spun polyester hose lined with TPU elastomer. Yellow ENCAP treatment improves visibility and durability, and this 300 PSIG (2100 kPa) service test pressure rated hose is designed for minimal friction loss. The high quality construction of HOTLINE® also makes it an excellent choice for a trash line or other single jacket utility applications

Length: Up to 100' (30,5 m).

HOTLINE® specifications

	The hose shall be a single jacket construction with 100% virgin spun polyester yarn.
	There shall also be a minimum of 12.0 filler yarns per inch in the jacket.
	The thickness of the lining shall be 0.015" (381 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
	The outside jacket shall be treated with yellow ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
	The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
	FM abrasion test of 5,000 cycles minimum and Taber abrasion test of 1,000 cycles minimum.
	At 600 PSIG (4200 kPa), its elongation shall not exceed 8% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
	The hose shall not twist more than 12 turns for the 1" (25 mm) size, and not more than 8 turns for the 1½" and 1¾" (38 and 45 mm) hoses per 100 ft (30,5 m) while at 600 PSIG (4200 kPa).
	Minimum service test pressure of 300 PSIG (2100 kPa).
	Minimum proof test pressure of 600 PSIG (4200 kPa).
	Minimum straight burst test pressure of 900 PSIG (6300 kPa).
	The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa).
	Meets or exceeds UL specifications.