|
Fol-Da-Tank, The First Self-Supporting Frameless Portable Water Tank
The first and still the best...Portable Collapsible Tank
|
Self-Supporting Frameless Portable Water Tank
Features: No Steel Frame, Totally Self Supporting, Unique Flotation Collar.
 The self-supporting frameless portable water tanks have been designed to meet the most stringent requirements of rural/urban fire fighting. Problems with inadequate or unusable supplies of water are eliminated by the use of open top self-supporting portable water tanks.
In remote areas the self-supporting tanks are designed for standby water containment, water shuttling situations and provide a continuous portable water supply. In remote areas, the SST may be filled by pumping water froma natural water source, such as a stream or creek, with a small gas operated pump. As the self-supporting tank begins to fill with water, its unique design allows it to become self supporting automatically. The SST does not require any additional supporting framework, assembly, or frame installation.
Construction Features: Rugged Hypalon, Vinyl or Canvas liners with solid brass grommets
Steel frames:
7/8" o.d. round tube, 14 gauge wall structural steel with snag free finish
Die cut, cadmium-plated hinges with heavy duty bolts
Aluminum frames:
1" square tube, 1/8" wall structural aluminum
with snag free finish
Die cut aluminum sheet plate hinges |
|
Two men can unload Fol-Da-Tank from the truck and set it up in less than 30 seconds. |
While pumper empties the Fol-Da-Tank, tanker can be bringing more water. |
With the fire out, Fol-Da-Tank can be emptied quickly with the exclusive 10" dia. drain sleeve. |
Applications:
 |
Fire Fighting | |
|
Water Relay | |
|
Water Storage | |
|
Mixing Tank (Fire retardant) | |
|
Hazardous Waste |
|
 |
 |
 |
|
| |
| |
Self-Supporting Frameless Portable Water Tank |
|
Features: No Steel Frame, Totally Self Supporting, Unique Flotation Collar
|
| Special high sides | |
| Self-supporting - No frame work | |
| No foot pump necessary | |
| Heavy duty vinyl (PVC) | |
| Easily repairable | |
| Any number and size of hose connections can be added for bottom drafting | |
| Compact storage bag included |
|
|
| Easy one man set-up | |
| Solid collar - No need to inflate | |
| No assembly | |
| 4 support rings | |
| All seams welded for longer life | |
| All self-supporting tanks are supplied with one threaded flange coupling installed. |
|
|
Portable and Practical
|
|
 | Portable and Practical
When no longer in use, the SST may be quickly drained through a fitting on the side. The SST is totally collapsible and easily stored in it's own compact storage bag. It is stored in the side or back of a truck, or the cargo compartment of a helicopter. |
| |
| Ground Covers | |
| Patch Kits | |
| Stenciling | |
| Top Covers | |
| Storz Connections |
|
|
|
|
NOTE: U.S. Food and Drug (FDA) approved potable water models available. |
|
|
Fol-Da-Tank Collapsible Tanks for Water Shuttle and Storage
|
|
APPLICATIONS|
| Fire Fighting - Water shuttle and storage | |
| Construction sites | |
| Crop spraying | |
| Feeding livestock | |
| Mixing fertilizer, pesticides, or herbicides | |
| For parks and nurseries - anywhere water sources are scarce | |
| Drinking water source |
|
FEATURES|
|
Potable Water Fabric NSF/ANSI 61 Standard | |
|
Eleven standard sizes | |
|
Compact -easy to store- folds down to 18"x18"x18" 46x46x46cm | |
|
Resists chemical contamination, mildew, rot and solar heat | |
|
RF welded seams for longer life | |
|
Severe weather tolerance to -40 degrees Fahrenheit | |
|
Fills and empties in minutes by pump or gravity flow | |
|
Easily handled by one man | |
|
1 1/2" / 4cm ball valve with female threads | |
|
Large 4" / 10cm dia. fill opening | |
|
Transportable by truck |
Top of Page |
 xr-3pw potable water tank shown |
|
Hard Suction Hose Support |
| This light weight aluminum hose stand is designed to support a large diameter hose when filling and draining a Self-Supporting tank. This hard suction hose support stores easily in limited spaces.
 |
The "FLYER" Multifunctional Helicopterable Tank |
| |
| USES: |
 |
| Pyramid Shape | |
| Heavy Duty (PVC) Vinyl | |
| Transportable by Helicopter or Truck
|
| Filling Back Packs
- Water
- Foam
- Retardants | | Small/Light Pumps | | Gravity Feed Reservoirs | Portable water - available
(Part No. FDA72/FDA134) |
|
|
|
|
|
Flyer 200 & 300, 525 and 600 Gallon Also Available |
| |
| Model: |
Fly 200 |
Fly 300 |
| Weight Filled: |
2030 lbs.(919kg) |
3100 lbs.(1400kg) |
| Collapsed Dim.: |
27"x29"x8" |
30"x32"x12" |
| Fill Port: |
4" |
8" |
| Outlet: |
1.5" Ball Valve |
1.5" Ball Valve |
| Weight Empty: |
25 lbs.(12kg) |
35 lbs.(16kg) |
| Capacity: |
240 gallons, 900L, 200IMP |
360 gallons. 1360L, 300IMP |
|
|
|
| |
|
|
| Relay/Storage Tank |
|
|
| DBL-HI Stores water in remote areas - Features: Forest Fire Fighting, Other special situations |
|
|
| Portable Haz-Mat Tanks |
| |
|
Construction Features | |
|
Sets up in seconds | |
|
No assembly required | |
|
Keep contaminated liquids contained | |
|
1 1/2" PVC outlet | |
|
Frame is resistance welded 7/8" steel | |
|
Heavy duty PVC liner |
|
|
|
| |
|
|
| Mini Dam™ |
|
For use along with forestry pumps and other hazardous containment.
Sizes: 3' x 3' x4", 4' x 4' x 4", 5' x 5' x 4", and 5' x 10' x 5"
Custom sizes also available.
Fabrics available: 14, 18, 20, and 22 oz. Vinyl, XR-5, Hypalon, and Urethane |
The tanks are NOT designed for handling petroleum products. |
Top of Page |
